DISCOUNT SALE -

MUST GO PRICE – Heavily Discounted – Don’ Miss!

NOW ONLY €17,000 EUR – ‘As is – Where Is’

One Very good conditioned Enercon E18 - 80kW (50Hz) Wind Turbine For Sale -

Available Immediately!

PERFECT FOR ITALY or Northern Ireland!

Available immediately!

Any ‘sensible’ offers considered!

Enercon E18 – 80kW- (50Hz)

• 36m Triangle Tubular Tower

• 18m Rotor Diameter

• 1992 Model

SERVICED BY ENERCON GERMANY – Full Service history available.

 This turbine is in immaculate condition – had full Enercon Service just before decommissioned in June 2013 – Dismantle and install immediately! - No refurbishing necessary! 

Sale price includes:

• Complete Turbines -Tower, Nacelle, Blades, Hub, Controller
• Technical drawings
• Dismantling not included – paid by buyer
• Loading onto trucks not included

WATCH THE VIDEO ADVERT

Please contact add owner NOW for more details

NOTES:

• Buyer must dismantle – Seller can assist in arranging dismantling
• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

Six units of fully refurbished Nordtank 150kW XLR Wind Turbines For Sale!

- Available now! Can ship anywhere in the world!

Guide Price – only 65,000 EUR per unit

MAIN SPECIFICATIONS – NTK 150/25

1. MAIN SPECIFICATIONS 

Nominal rating : 150 kW
Rotor diameter : 24.6 m
Swept rotor area : 475 m²
Hub height : 32.5 m
Rotor speed : 38 rpm
Complete weight approx.: 21 tons
2. ROTOR

Number of blades : 3
Diameter: 24.6 m
Swept rotor area : 475 m²
Hub height standard: 32.5 m
Rotor speed (Sync.) : 37.6 rpm
Tip speed (Sync.) : 48.4 m/s
Rotor shaft tilt : 4
Tip setting : 0.5
Solidity : 7.3 %
Power regulation : Stall
Orientation : Upwind
Complete weight approx.: 3.9 tons
3. BLADES

Manufacturer : LM GLASFIBER
Type : LM 12 HHT
Blade length : 11.5 m
Material : Fibreglass/Polyester/Stainless steel
Air brake system : Turnable blade tip
Blade profiles : NACA 63200/400
Twist : 20.5
Biggest cord : 1.50 m
Tip cord : 0.56 m
Blade area : 11.6 m²

Blade weight each : 830 kg

4. HUB

Manufacturer : Kristiansand Jernstøberi
Type : NTK 150
Material : Meehanite SFF 400
Protection : Sandblast, metallized and painted
Weight : 1.3 tons

5. ROTOR SHAFT

Manufacturer : NORDTANK design
Type : Die forged shaft and flange
Material : 30CrNiMo8V

6. ROTOR BEARINGS

Manufacturer : SKF
Type : Spherical roller bearings
Bearing size : 2 pc: 23138 CC/W33 – 23036 CC/W33

7. MAIN SHAFT SUPPORT HOUSING

Manufacturer : NORDTANK design
Type : NTK 150 integrated double bearings
Material : Meehanite SFP 500
Total weight incl. rotor shaft: 500 kg

8. GEARBOX

8.1. General
Design : Two step parallel shafts/helical
Ratio : 1: 39.90
Low speed shaft nom. : 38.0 rpm
High speed shaft max.: 1512 rpm
Nominal mechanical power: 175 kW
Application factor : KA = 1.3
Safety against:

1. Fatigue in cog roots: SF 1.6
2. Pitting : SH 1.25
3. Scuffing : SS 1.5

Shaft seals : Maintenance free labyrinth types
Lubrication : Splash lubrication
Oil type : Mobil SHC 632 – or

Shell DK Gear Oil 320

8.2. Gearbox – type I
Manufacturer : Jahnel Kestermann
Type : AA410
Oil sump : 60 l
Weight complete with oil: 2.2 tons

8.2. Gearbox – type II
Manufacturer : Flender
Type : SZAK 2410
Oil sump : 55 l
Weight complete with oil: 2.2 tons

9. MECHANICAL BRAKE

Manufacturer : NTK/Demag
Type : Failsafe
Brake disc : Cast iron, placed on the HSS
Number of brake calibers: 1 pc

10. COUPLING

Manufacturer : Centaflex CF-A-140-G-1
Type : Flexible cardan

11. YAW SYSTEM

Manufacturer : NORDTANK design
Type : NTK 150 slide bearing system
Control : Active yaw/wind vane
Yaw fix into the wind: Yaw brakes and friction
Number of yaw gear motors: 2 pc
Number of yaw grips/brakes: 4 pc

12. YAW GEAR AND MOTORS

Gear manufacturer : BONFIGLIOLI-TRASMITAL
Type : Planetary/gear 303L2HZ-MAS25

Electric motor : Standard norm
Type/enclosure :
Voltage :
Rating :
6-poles, IP54
3 x 400 Volt
0.25 kW

13. GENERATOR

Manufacturer : ABB MOTOR
Maximum power rating:
50 Hz
150 kW/Class B temperature rise
165 kW/Class F temperature rise

Full load current at 150 kW: 275 Ampere

14. HYDRAULIC POWER STATION MECHANICAL BRAKE

Manufacturer : Industri Consult A/S
Type : IC 1F-1.5
Pressure area : 11-27 bar
Relief valve : 27 bar
Oil reservoir : 1.5 l
Oil type : Mobil SHC 524
Electric motor : Permanent magnetic motor
Type : PM50/42
Voltage : 24 Volt DC

15. WIND TURBINE CONTROLLER

Manufacturer : Dan Control Engineering A/S
Type : Microprocessor based
Maximum current breaker : 400 Volt
Thermal max. current range: 320-400 Ampere, slow reaction
Magnetic short circuit protection: 2.0-4.0 kAmpere, quick reaction
Capacitor battery voltage : 400 Volt
Number of capacitors : 6 x 12.5 kVAr
Max. cut-in current by thyristors: 343 Ampere
Maximum current at motor start: 200 Ampere
Cut-in system : Soft by thyristors
Operational voltage range : 340-418 Volt
Frequency : 50 +/-1 Hz
Automatic motor start : Yes
Weight : 200 kg

16. TOWER

Manufacturer : NORDTANK design
Type : Conical tubular steel
Tower height : 31 m
Plate/flange materials: Steel 37.2
Bolt material : ISO 8.8/10.9 hot dip galvanized

19. POWER CURVE

01.08.92

(m/s) kW
0- 0,0
1- 0,0
2- 0,0
3-0,0
4- 0,6
5- 7,8
6- 23,3
7- 42,0
8- 64,7
9- 87,2
10- 109,3
11- 128,7
12- 144,0
13- 154,0
14- 157,1
15- 154,9
16- 149,4
17- 146,0
18- 143,4
19- 142,6
20- 142,4
21- 142,4
22- 142,4
23- 142,4
24- 142,4
25- 142,4

The power curve is shown at standard conditions according to DIN ISO
15 C air temperature, 1013 hPa air pressure and a maximum air turbulence intensity of 15%.

DOWNLOAD:

 Full Specifications – click here!

Refurbishing Schedule – click here!

Sale price includes:

• Complete Turbines – Towers, Nacelles, Blades, Hubs, Controllers
• Technical drawings
  
• Full refurbishment

 WATCH THE VIDEO ADVERT

Please contact add owner NOW for more details

NOTES:

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

Perfect for Italy or Northern Ireland!

2 x SEEWIND S110 – 110kW and S20/110 – 115kW (50Hz) Wind Turbines for sale –

S20/110 is still in operation until end 2014 and in good condition – The S110 unit ony needs blade tip replaced and can be dismantled immediately!

Picture for illustration only!

Perfect for Italy or Northern Irland! These turbines are in very good condition -

• Seewind – 110kW – (50Hz)

• 2 units with 30m tower

• 22m Rotor Diameter

• S110 is 1995 model the S20/110 is a 1993 model
• First commissioned in 1993 and 1995
• Available – Immediately
• If refurbishing required, please enquire

TECHNICAL SPECIFICATIONS

Summary:

• Turbine type: Seewind 110kW (50Hz)
• Nominal Output: 110kW (50Hz)
  
• Rotor diameter: 22m
  
• Tower Height: 30m
• Type: Stall
  
• Built in 1993 and 1995

Turbine:

• Configuration: 3 Blades Horizontal Axis, Upwind
• Rated Power: 110kW and 115kW

Rotor:

• Rotor Diameter: 22 m

Generator:

• Rated Power: 110kW and 115kW

Sale price includes:

• Complete Turbine – Tower, Nacelle, Blades, Hub, Controller
  
• Technical drawings
  
• Full Service History available

Please contact add owner NOW for more details

NOTES:

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

One GOOD CONDITIONED WindWorld W2700 – 150 kW (50Hz) WIND TURBINE IMMEDIATLEY AVAILABLE –

27m Rotor Diameter! – 30m Tower

Price on request - ‘where is – as is’ ExWorks owner’s site.

• Already dismantled – No additional dismantling costs

• Turbine Nacelle Refurbished in 2009

• Gearbox refurbished  & Generator Bearings

• Ready for any inspection

Located in Northern Ireland - Low tranportation costs for buyer from NI! Early viewing recommended as this turbine will go quick!

• WindWorld was a subsidary manufacturer of BONUS A/S
• No additional dismantling costs!
• For buyers from Northern Ireland! – Very low transportation costs as this turbine is already located in NI
• Rotor diameter 27 m
• 30 m hub height
• Year: 1992

TECHNICAL DATA OF WindWorld 150kW

• Type: WindWorld 150kW
• Rotor diameter: 27 m
• Swept area: 423 m2
• Rotor rpm: 41,9
• Power regulation by stall
• Tower height 29,7 m
• Hub height 30,3 m
• White tube tower in 2 sections
• Power regulation: stall
• Number of blades: 3
• Frequency: 50 hz
• Voltage: 400V

One GOOD CONDITIONED WindWorld W2700 – 150 kW (50Hz) WIND TURBINE IMMEDIATLEY AVAILABLE

Price on request - ‘where is – as is’ ExWorks owner’s site.

Please note: One blade tip was damaged in transport from Germany to Northern Ireland- can be fixed prior to sale (no problem)

TECHNICAL DOCUMENTATION DOWNLOAD

WindWorld 2700 – 150kW.pdf

Contact Ad owner for quick sale

Note: Please do not ask for shipping quotes or CIF prices. Shipping must be arranged by buyer themselves. Cheap to transport. Complete turbine fits on 2 standard 13.6m open deck lorries!

Viewings will only be arranged if signed LOI (Letter of Intention) has been received.

5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment

6. Please refer to our full terms & conditions. Click here!

Wind Turbine Refurbishing by MyWindPowerSystem

MyWindPowerSystem Ltd. works with highly skilled remanufacturers, refurbishers and machinists to ensure the re-manufactured equipment is properly restored to the original manufacturers specifications and is refurbished according to our high standards.

Refurbished wind turbines offered by MyWindPowerSystem Ltd. are completely disassembled and thoroughly inspected and cleaned. Our highly experienced wind turbine refurbishment affiliates evaluate the condition of the reconditioned wind turbine and replace all wear parts. The main moving components will be reconditioned to new or better than new standards. The controls, gearbox, hub, generator, hydraulic system are all thoroughly reconditioned and are either restored or replaced. All refurbished wind turbines come with a full technical report of the reconditioning work undertaken.

Completed refurbished wind turbines are restored to the original manufacturers specifications and offer a minimum warranty of 1 year. Extended warranties may be purchased upon request.

Depending on the turbine type and size, a typical reconditioning process takes approximately between 3 months and up to 1 year for very large size turbines.

Description of the reconditioning process:

• Tower/Head: Inspect/replace as needed welds, bearings, blast & paint, the unit will have new base bolts. Major axis and adjust on-axis coupling. Analysis of state of the “I / F” with the hub, replacement of bearings and seals on hatches. Verification of tolerances in bearing seat shaft and bearings,
• Gearbox: Check the stage trains, both primary and secondary for backlash and endplay, replace seals and Verification of tolerances throughout the box. Hydraulic System cleaning and priming circuit pressure and leak test. Change seals, filters, fittings Verification of pressure level and vibration load, and repaint.
• Brake unit: Pressure test, replace pads, leading lines (hoses), and rebuild brake caliper – as needed. Meg and test brake motor.
• Yaw system: Meg and test yaw motor. Inspect yaw gearbox, fill with fluid. Inspect, adjust slide shoes, or replace if needed
• Generator: Disassemble generators, dry and impregnate generator, re-dip armatures, and replace bearings. For small generator, check, adjust or replace belts. Test and adjust RPM sensor. Dynamic test analyzes noise and vibration and Thermal Verification test and paint unit.
• Main shaft: Inspect bearings and seals. Check for wear and end play.
• Instruments: Upgrade and test anemometer and wind vane.
• Controller: Tighten all terminations and test the upgraded unit.
• Blades: Inspect tips; replace bushings, pins, if needed. Balance blades to each other.
• SCADA: Upon request, designing and installing a complete SCADA/Remote monitoring system

MyWindPowerSystem Ltd. can arrange to refurbish most wind turbine models to either 50Hz or 60Hz

If you decide to purchase a used wind turbine including refurbishing, please let us know at the time of inquiry and we are happy to provide a detailed price quote including a complete refurbishing schedule.

Please contact us with any question you may have about the refurbishing you’re your wind turbine.

DOWNLOAD: Refurbished Wind Turbines Schedule

Are you looking for a well priced used wind turbine? Then look at our marketplace with many attractive offers for all brands and in all price ranges! click here

RELATED LINKS:

• BUY A WIND TURBINE -Hints & Tips

• WHY BUYING A USED WIND TURBINE?

• SELLING ELECTRICITY BACK TO THE GRID

• ADDITIONAL INCOME FOR LAND OWNERS AND FARMERS

Watch this high quality animation. ‘How Does Wind Power Work’?

Your MyWindPowerSystem Team

2 Units of DANWIN 19 – 100kW (50Hz) WIND TURBINES FOR SALE-

Available now!

Still in operation!

Only €18,900 EUR -As is – Where is – plus dismantling (€5,000 EUR)

• Rated output: 100 kW
• Tower Height: 22m & 26m
• Rotor Diameter: 20m
• Year of build: 1990/91
• Full manufacturers specifications,  users guide and service manuals available.

• Buyer must pay for dismantle and collect
• Please do not request a shipping quote from us!
  
  • The items listed in this advert are offered for sale by a private owner or wind farm operator through MWPS.
    
  • Neither MWPS nor the owner of these turbines provide shipping or transportation services
    
  • Unless a shipping service/offer is specifically listed in this advert, collection and transportation/shipping must be organized and paid for by the buyer.
  • However, both MWPS or the owner will endeavor to assist you in the best way to organize the Loading, and transportation or you can get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports using the service provided by uShip. See below!
  • 
    
• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

Two very good conditioned Tacke TW60 – 60kW Wind Turbine for sale –

Bargain Price - Contact Us For More Details

Perfect for Italy or Northern Irland! These turbines are in very good condition. One already dismantled and immediately available, the second one still in operation and scheduled for decommissioning July/August 2014.  Early viewing recommended to avoid disappointment!

• 2 x Tacke TW60 – 60kW – (50Hz)

• 40m & 30m Towers (3 x 10m and 4 x 10m sections – Easy and cheap to transport)

• 17.5m Rotor Diameter – Pitch controlled

• Commissioned in 1993
• One Available Immediately, the second one available July/August 2014

TECHNICAL SPECIFICATIONS Summary:

• Turbine type: Tacke TW60
• Nominal Output: 60kW – (50Hz)
• Rotor diameter: 17.5m
• Tower Height: 30m & 40m  (three & four sections)
• Type: Stall
• Commissioned in 1993

Turbine:

• Configuration: 3 Blades Horizontal Axis, Upwind
• Rated Power: 60kW

Rotor:

• Rotor Diameter: 17.5 m

Generator:

• Rated Power: 60kW

Sale price includes:

• Complete Turbine – Tower, Nacelle, Blades, Hub, Controller
• Technical drawings
• Full Service History available

Please contact add owner NOW for more details

NOTES:

•  Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

One Vestas V20 – 100kW (50Hz) Wind Turbine For Sale -

Good condition – Available Immediately- Decommissioned June 2014 -

 Picture For Illustration Only!

One good conditioned fully operating until decommissioning this June 2014!

• Built in 1994

Available Now! -

Price ‘As Is – Where Is’  - including dismantling & loaded onto buyer’s truck

• Vestas V20 – 100kW- (50Hz)

• 39m Lattice Tower – ALSO AVAILABLE WITH 30m MONOPOLE STEEL TOWER (at extra cost)

• 20m Rotor Diameter

• 1994 Model

Service history available.

 FULL REFURBISHING ALSO AVAILABLE incl. 1 YEAR WARRANTY! 

ALSO AVAILABLE WITH 30m MONOPOLE STEEL TOWER (at extra cost)

Picture For Illustration Only ! Showing with 30m Monopole Steel Tower

Ask for more details!

Sale price includes:

• Complete Turbine – Tower, Nacelle, Blade, Hub, Controller
• Dismantling
• Loading onto trucks
• Technical drawings
• Service History available

Please contact add owner NOW for more details

NOTES:

• Seller will dismantle – Buyer must not pay extra for dismantling
• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

1 x Absolute Mint & Immaculate Conditioned AN Bonus 150 – 150kW Wind Turbines – complete – For Sale

PERFECT FOR NORTHERN IRELAND or ITALY!

Only €36,000 ‘As Is – Where Is’

or €69,000 EUR - Fully Refurbished and delivered within EU incl. 1 Year Warranty! 

• One Bonus 150kW(50Hz) complete for immediate sale

• Only €36,000 ‘As Is – Where Is’ or €69,000 EUR – Fully Refurbished and delivered within EU

• Including one year warranty on replaced components and workmanship if refurbished

.

• Rated output: 150kW (50Hz)
• Quantity available: 1
• Tower Height: 30m (3 piece tower)
• Rotor Diameter: 24m
• Year of build: 1994
• Full Service History

Sale price contains:

• Complete Turbine – Tower, Nacelle, Blade, Hub, Controller
  
• Hand books, User Manuals, Technical drawings for turbine and foundation rings and frames etc.

Perfect for investors from Northern Ireland or other countries with high FIT’s for this size turbine. Tower comes in 3 sections, cheap to tranport! Only one standard 13m Tautliner required!

THIS TURBINE WILL SELL QUICK SO HURRY NOT TO MISS OUT!

Bonus 150 – Description

Bonus 150 – 150kW Wind Turbine Technical Description

WATCH THE VIDEO ADVERT

NOTES:

• Buyer must collect – dismantling not included in price!
• Please do not request a shipping quote from us!
  
• The items listed in this advert are offered for sale by a private owner or wind farm operator through MWPS.
  
• Neither MWPS nor the owner of these turbines provide shipping or transportation services
  
• Unless a shipping service/offer is specifically listed in this advert, collection and transportation/shipping must be organized and paid for by the buyer.
• However, both MWPS or the owner will endeavor to assist you in the best way to organize the Loading and transportation.
• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

NEW INSTRUCTION

Three A/S BONUS 95kW – (50Hz) WIND TURBINES FOR SALE

Picture For Illustration only!

• Still in operation!

• Sensible Offers  Welcome!

• Seller will dismantle!

• AS Bonus 95kW (50Hz) - DANREGN VINDKRAFT A/S Bonus 95

• Rated output: 95kW

• Tower Height: 24m (tripod tower)

• Rotor Diameter: 19.5m

• Year of build: 1986

• Qty available: Three

• Seler will dismantle but Buyer must pay for dismantle and collect
• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

Perfect for Italy or Northern Ireland!

2 x SEEWIND S110 – 110kW and S20/110 – 115kW (50Hz) Wind Turbines for sale –

S20/110 is still in operation until end 2014 and in good condition – The S110 unit ony needs blade tip replaced and can be dismantled immediately!

Picture for illustration only!

Perfect for Italy or Northern Irland! These turbines are in very good condition -

• Seewind – 110kW – (50Hz)

• 2 units with 30m tower

• 22m Rotor Diameter

• S110 is 1995 model the S20/110 is a 1993 model
• First commissioned in 1993 and 1995
• Available – Immediately
• If refurbishing required, please enquire

TECHNICAL SPECIFICATIONS

Summary:

• Turbine type: Seewind 110kW (50Hz)
• Nominal Output: 110kW (50Hz)
  
• Rotor diameter: 22m
  
• Tower Height: 30m
• Type: Stall
  
• Built in 1993 and 1995

Turbine:

• Configuration: 3 Blades Horizontal Axis, Upwind
• Rated Power: 110kW and 115kW

Rotor:

• Rotor Diameter: 22 m

Generator:

• Rated Power: 110kW and 115kW

Sale price includes:

• Complete Turbine – Tower, Nacelle, Blades, Hub, Controller
  
• Technical drawings
  
• Full Service History available

Please contact add owner NOW for more details

NOTES:

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

One Vestas V20 – 100kW (50Hz) Wind Turbine For Sale -

Good condition – Available Immediately- Decommissioned June 2014 -

 Picture For Illustration Only!

One good conditioned fully operating until decommissioning this June 2014!

• Built in 1994

Available Now! -

Price ‘As Is – Where Is’  - including dismantling & loaded onto buyer’s truck

• Vestas V20 – 100kW- (50Hz)

• 39m Lattice Tower – ALSO AVAILABLE WITH 24m MONOPOLE STEEL TOWER (at extra cost)

• 20m Rotor Diameter

• 1994 Model

Service history available.

 FULL REFURBISHING ALSO AVAILABLE incl. 1 YEAR WARRANTY! 

ALSO AVAILABLE WITH 24m MONOPOLE STEEL TOWER (at extra cost)

Picture For Illustration Only ! Showing with 30m Monopole Steel Tower

Ask for more details!

Sale price includes:

• Complete Turbine – Tower, Nacelle, Blade, Hub, Controller
• Dismantling
• Loading onto trucks
• Technical drawings
• Service History available

DOWNLOAD TECHNICAL SPECIFICATION:

Vestas V20 120kW Wind Turbine-Technical Product Description.pdf

Please contact add owner NOW for more details

NOTES:

• Seller will dismantle – Buyer must not pay extra for dismantling
• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

1 x Fair conditioned WindWorld W2700 – 150 kW (50Hz) WIND TURBINE IMMEDIATLEY AVAILABLE –

• 27m Rotor Diameter!

• Price only €24,900 EUR – ‘where is – as is’ ExWorks owner’s site. 

• Still erected and fully operating -

• Requires refurbishing including blades refurbishing – located near coast – cosmetic rust removal required,  hence this low price!

• • DISMANTLING NOT INCLUDED!

• SPECIAL DEAL FOR NORTHERN IRELAND and ITALY! -Fully re-conditioned – delivered with 1 year warranty on replaced components and workmanship, only €59,000 EUR excl. dismantling (approx. €8,500 EUR)

Picture for Illustration Only!

• WindWorld was a subsidary manufacturer of BONUS A/S
• Turbine still erected but disconnected from grid - Dismantling not included in price!
• Rotor diameter 27 m
• 30 m hub height (2 piece tower)
• Year: 1994

TECHNICAL DATA OF WindWorld 150kW

• Type: WindWorld 150kW
• Rotor diameter: 27 m
• Swept area: 423 m2
• Rotor rpm: 41,9
• Power regulation by stall
• Tower height 29,7 m
• Hub height 30,3 m
• White tube tower in 2 sections
• Power regulation: stall
• Number of blades: 3
• Frequency: 50 hz
• Voltage: 400V

1x Fair conditioned WindWorld W2700 – 150 kW (50Hz) WIND TURBINE IMMEDIATLEY AVAILABLE –

• 27m Rotor Diameter!

• Price only €24,900 EUR – ‘where is – as is’ ExWorks owner’s site.

• Requires refurbishing including blades refurbishing – located near coast – cosmetic rust removal required,  hence this low price!

• • DISMANTLING NOT INCLUDED!

• SPECIAL DEAL FOR NORTHERN IRELAND and ITALY! -Fully re-conditioned – delivered with 1 year warranty on replaced components and workmanship, only €59,000 EUR excl. dismantling (approx. €8,500 EUR) 

Call us today on +44 (0) 117 244 9353

Contact Ad owner for quick sale

Note: Please do not ask for shipping quotes or CIF prices. Shipping must be arranged by buyer themselves. Cheap to transport. Complete turbine fits on 2 lorries!

Viewings will only be arranged if signed LOI (Letter of Intention) has been received.

Time wasters and tire kickers will not be accommodated!

Current Sales List - click here!

Call us today on +44 (0) 117 244 9353

5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment

6. Please refer to our full terms & conditions. Click here!

CLEAR OUT SALE!

LAGERWEY WIND TURBINES –  LW15/75 – 75kW

Prices start from €17,400 EUR only

• 5 units immediately available – ‘As Is’ or Fully Refurbished

• CAN BE FITTED WITH BRAND NEW 60kW ABB GENERATORS OR

• WITH A FULLY REFURBISHED 50kW GENERATOR !

• Turbines already dismantled – Ready for collection
• Built in 1991 – 1993 
• Steel tower choice of 24m  - 30m  & 39m height
• Rotor and Ball bearings should be verified by buyer for tear and wear if bought without refurbishing

• Full Refurbishment start from €16,900 EUR
• Controller upgrade to latest technology ‘Wago’ remote control system – only €9,800 EUR extra

• New foundation rings available starting from €2,900 EUR only

• Transportation start from only €2,500 EUR within EU

• Installation prices start from only €5,000 EUR plus travel and accomodation for crew

 

Pictures for illustration only!

TECHNICAL DATA OF THE LAGERWEY 15/50 & LW15/75 WINDTURBINES

GENERAL

• nominal power 75 kW – 60kW or 50kW de-rated (upgrade to WAGO control system required if de-rating form 75kW to 60kW required)

ROTOR

• number of blades 2
• diameter 15 m

BLADES

• blade length 7,5 m

GEARBOX

• number of stages 2
• manufacturer Flender, Germany

GENERATOR

• type asynchrony
• nominal power 75 kW or de-rated to 60kW for Italy (with power output certification) or 50kW generator can be fitted
• number of poles 4
• nominal voltage 400 volt

TOWER

• type cylindrical pipe
• number of sections 3
• hub height available: 24m – 30m – 39m

YAW-SYSTEM

• system active
• signal based on windvane
• driven by e-motor with worm-wheel reduction

CONTROLLER

• control by Microprocessor
• remote monitoring optional; typically via the public telecommunications network
• Upgrade to WAGO control system – 100% remote control unit from you PC or Laptop

5 x  LAGERWEY WIND TURBINE LW15/50 and  LW15/75  IMMEDIATELY AVAILABLE!

Contact Ad owner for quick sale - Call us today on +44 (0) 117 244 9353

Note: Please do not ask for shipping quotes or CIF prices. Shipping must be arranged by buyer themselves but MWPS can assist in obtaining competitive quotes.  

Viewings will only be arranged if signed LOI (Letter of Intention) has been received.

Time wasters and tire kickers will not be accommodated!

Current Sales List – click here!

Disclaimers:

Above technical data is subject to technical alterations, errors and omissions

1. Wind turbine installation is highly customized according to location, set-up, seismic conditions, soil, zoning, local restrictions, and many other factors
2. Taxes, Containerizing and Shipping is not included. Estimates do not include export and other international fees.
3. This information should be used for general budgetary reasons only.
4. Pricing and availability is subject to change at any time without notice
5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment
6. Please refer to our full terms & conditions. Click here!

Click link below for more details!

CRAZY ‘QUICK PRICE’ SALE!

LAGERWEY LW15/50 – 30m Tower

€5,000 EUR only

• immediately available – collect now

• ‘As Is’ – ‘Where Is’

• CAN BE FITTED WITH BRAND NEW 60kW ABB GENERATORS OR

• Turbine already dismantled – Ready for collection

• Built in 1989 

• Steel tower  – 30m  

• 15m Rotor 

Transportation start from only €2,500 EUR to Italy!

TECHNICAL DATA: 

GENERAL

• nominal power 50kW

ROTOR

• number of blades 2
• diameter 15 m

BLADES

• blade length 7,5 m

GEARBOX

• number of stages 2
• manufacturer Flender, Germany

GENERATOR

• type asynchrony
• nominal power 50kW – 60kWgenerator can be fitted
• number of poles 4
• nominal voltage 400 volt

TOWER

• type cylindrical pipe
• number of sections 3
• hub height: 30m

1 x  Lagerwey LW15/50   – Only €5,000 –

- Already dismantled –  IMMEDIATELY AVAILABLE!

Contact Ad owner for quick sale - Call us today on +44 (0) 117 244 9353

Note: Please do not ask for shipping quotes or CIF prices. Shipping must be arranged by buyer themselves but MWPS can assist in obtaining competitive quotes.  

Viewings will only be arranged if signed LOI (Letter of Intention) has been received.

Time wasters and tire kickers will not be accommodated!

Current Sales List - click here!

For more details - click here!

Disclaimers:

Above technical data is subject to technical alterations, errors and omissions

1. Wind turbine installation is highly customized according to location, set-up, seismic conditions, soil, zoning, local restrictions, and many other factors
2. Taxes, Containerizing and Shipping is not included. Estimates do not include export and other international fees.
3. This information should be used for general budgetary reasons only.
4. Pricing and availability is subject to change at any time without notice
5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment
6. Please refer to our full terms & conditions. Click here!

Share

Brand New Instruction –

WindKing FD18.0-50 – 50kW Used Direct Drive – PMG Wind Turbine –

Complete – For Sale

Only 3 Years Old –  Still in operation! Perfect for Installation in Italy!

Can be viewed in full operation!

 Immediately Available! Due to replacement with bigger turbine!

Picture for Illustration Only!

• 1 x WindKing  FD18.0 – 50kW – (380V – 50Hz)

• Price: €47,500 EUR only. Including dismantling!

  Turbine located and in operation in Italy – Can be inspected in full operation

• Full Service history available!

Technical Specification:

• Rated output: 50kW (380V – 50Hz)
• Quantity available: 1
• Tower Height: 28m
• Rotor Diameter: 18m
• Year of build: 2011
• CE / ISO certified
• Year of first commissioning: 2012

Sale price contains:

• Complete Turbine – Tower, Nacelle, Blades, Hub, Controller, Inverter
  
• Hand books, User Manuals, Technical Service Reports

NOTES:

• Buyer must collect
• • The items listed in this advert are offered for sale by a private owner or wind farm operator through MWPS.
  • Both MWPS or the owner will endeavor to assist you in the best way to organize the Loading, and transportation.

Please contact ad owner NOW for more details

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

Current Sales List - click here!

Disclaimers:

Above technical data is subject to technical alterations, errors and omissions

• 1. Wind turbine installation is highly customized according to location, set-up, seismic conditions, soil, zoning, local restrictions, and many other factors
• 2. Taxes, Containerizing and Shipping is not included. Estimates do not include export and other international fees.
• 3. This information should be used for general budgetary reasons only.
• 4. Pricing and availability is subject to change at any time without notice
• 5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment#6. Please refer to our full terms & conditions. Click here!

Share

.

OPPORTUNITY!

MINT CONDITIONED – Fully refurbished Vestas V17 – 75kW (50Hz) wind turbine for sale!

ONLY €77,500 EUR!

1 year warranty on all moving parts (on return by client of defected parts)

Perfect for installation in Northern Ireland or Italy for which this turbine qualifies for high Feed In Tariffs

• 1 x Vestas V17 – 75kW (50Hz) For Sale for only €77,500 EUR – already dismantled
  

• Ready to ship
  

• Perfect for domestic use, to feed your business premises or sell electricity back to the grid
  

• Seller can assist in transportation and installation
  

  Fully refurbished as new Vestas V17. Gearbox overhauled. Complete repaint. Generator rewound. Tower repainted. New braking system. nacelle repainted. Blades cleaned, polished and resealed. Factory Standard wind turbine. New upgraded Controller can be provided at extra cost and power factor adjustment if needed – ask for price on upgraded controller!

• Built: 1985 – Fully Refurbished – Mint condition
  
• Nominal Output: 75 kW
• Rotor diameter: 17 meter
• Tower Height: 23 meter (3 sections – easy to transport)
  
• Flender Gearbox
• ASEA Generator
  

DOWNLOAD:

Vestas V17 – 75kW Power Curve.pdf

Sale price contains:

• Complete Turbine – Tower, Generator, Blades, Hub & Controller
• Service history documentation
• Technical drawings

Additional Options:

Owner can dismantle at extra cost and assist in transportation

Please contact ad owner NOW for more details

NOTES:

• Viewings at seller’s site can only be arranged if signed LOI (Letter of Intention) has been received

Share

Nordtank NTK130 – Made in Denmark

RARE OPPORTUNITY FOR ITALY !

20 Units of Used Wind Turbines NORDTANK NTK 130kW For Sale! – (6 units already sold!)

Also available as 60kW de-rated (with rewound or brand new 60kW)

• Still available for sale 14 units under following delivery conditions:

Available in ‘As Is’ condition, overhauled (all faulty parts replaced) or fully refurbished (with 1 year warranty on refurbished or replaced parts & workmanship)

- 1 year warranty by refurbisher from either Denmark – Germany or Holland -

 Note: These turbines are sold ‘without the original controllers’ or with a brand new Orbital TMC3 Controllers

Available Purchase Options:

• Dismantled – As is – where is – ExWorks Denmark without controller
• Including loading and transport to Salerno warehouse, Italy – Dismantled – As is – where is – ExWorks Salerno, Italy without controller
• Dismantled – As is – where is ExWorks Salerno, Italy with brand new Orbital TMC3 controller with manufacturer warranty
• Dismantled & Overhauled (faulty parts repaired or replaced with new) – ExWorks Salerno, italy with brand new Orbital TMC3 controller with manufacturer warranty
• Dismantled & Fully refurbished and de-rated, re-wound 60kW generator - ExWorks Salerno with brand new Orbital TMC3 – controller with 1 year warranty provided by the refurbisher on refurbished and replaced parts and standard manufacturer warranty of the Orbital controller. This Fully Refurbished Option also available with brand new 60kW generator and manufacturer warranty. Price, add €4,000 EUR extra

IMPORTANT: Refurbishing is executed by authorized facility in Salerno, Italy (having all Italian certifications necessary for Italian authorities, for 60kW depowered turbines).

Prices see below!

Type: NTK 130
Qty available: 10 now – 10 more by June 2015

Rated Power Output: 130kW – (50Hz) (60kW de-rated also available)
Year Of Manufacture: 1988
Tower Height: 27m
Rotor: 21m
Availability: Immediately

Country of Origin: DK
Type:Variant

Variable Speed: no
Power control: Stall
Swept Area: approx. 330 m2
Power per m2: 0,394 kW/m2
Rpm at rated power: 44 rpm
Rpm at cut in: 0 rpm
Tower: Tubular Steel – 3 pieces

Already dismantled – Located in Italy & Denmark

Nordtank_130 Power Curve

DOWNLOAD TECHNICAL SPECIFICATIONS:

NORDTANK NTK130 Techical specifications, Click here!

Orbital TMC3 Wind Turbine Controller, Click here!

 Available Purchase Options:

Dismantled – As is – where is – ExWorks Denmark without controller

• €33,000 Euro for 1 x unit
• €32,000 Euro if 2 x units bought
• €31,000 Euro if 3 x units bought

Dismantled – As is – where is – ExWorks Salerno, Italy without controller

• €42,000 Euro for 1 x unit
• €41,000 Euro if 2 x units bought
• €40,000 Euro if 3 x units bought

Dismantled – As is – where is ExWorks Salerno, Italy with brand new Orbital TMC3 controller with manufacturer warranty

• €47,000 Euro, for 1 x unit
• €46,000 Euro if 2 x units bought
• €45,000 Euro if 3 x units bought

Dismantled & Overhauled (faulty parts repaired or replaced with new) – ExWorks Salerno, italy with brand new Orbital TMC3 controller with manufacturer warranty

• €57,000 Euro, for 1xunit
• €56,000 Euro if 2xunits bought
• €55,000 Euro if 3xunits bought

Dismantled & Fully refurbished and de-rated, re-wound 60kW generator - ExWorks Salerno with brand new Orbital TMC3 – controller with 1 year warranty provided by the refurbisher on refurbished and replaced parts and standard manufacturer warranty of the Orbital controller

• €72,000 Euro, for 1xunit
• €71,000 Euro if 2xunits bought
• €70,000 Euro if 3xunits bought

This Fully Refurbished Option also available with brand new 60kW generator and manufacturer warranty. Price, add €4,000 EUR extra

Please contact ad owner NOW for more details

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

Current Sales List - click here!

Disclaimers:

Above technical data is subject to technical alterations, errors and omissions

• 1. Wind turbine installation is highly customized according to location, set-up, seismic conditions, soil, zoning, local restrictions, and many other factors
• 2. Taxes, Containerizing and Shipping is not included. Estimates do not include export and other international fees.
• 3. This information should be used for general budgetary reasons only.
• 4. Pricing and availability is subject to change at any time without notice
• 5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment#6. Please refer to our full terms & conditions. Click here!

Share

 Very Special Offer!

Fully refurbished Vestas V17 – 75kW (50Hz) wind turbine for sale!

Perfect for installation in Northern Ireland or Italy for which this turbine qualifies for high Feed In Tariffs

This Vestas V17 is in excellent condition. It was installed just over two years ago and produced 238,000 units. It was recently dismantled as a larger turbine has been installed on the same site.

• Vestas V17 – 75kW (50Hz) For Sale  – already dismantled
  

• Ready to ship
  

• Perfect for domestic use, to feed your business premises or sell electricity back to the grid
  

• Seller can assist in transportation
  

  Fully refurbished as new Vestas V17. Many new parts installed.

• Built: 1986 – Fully Refurbished in 2013 – Mint condition
  
• Nominal Output: 75 kW
• Rotor diameter: 17 meter
• Tower Height: 24 meter (three sections)
  

Sale price contains:

• Complete Turbine – 24m Tower, Generator, Blades, Hub & Controller
• Technical drawings

 MAJOR PARTS REPLACED:

• New controller (Orbital).
• Gearbox overhauled.
• Generator rewound.
• Brakes overhauled.
• Complete repaint.
• Reconditioned yaw motor.
• New yaw pads.
• Blades cleaned and polished.

Please contact ad owner NOW for more details

IMPORTANT NOTES:

• The usual Time wasters and Tire Kickers will strictly not be accommodated 

Please contact add owner NOW for more details

Current Sales List - click here!

Call us today on +44 (0) 117 244 93 53

Share

USED LAGERWEY LW18-80 (80kW – 60kW or 50kW) WIND TURBINE FOR SALE!

Picture for Illustration only!

Prices  ‘where is – as is’ ExWorks owner’s site

Full refurbishing also available including 1 year warranty on replaced and refurbished parts and workmanship! ASK FOR MORE DETAILS

ITALY! THIS TURBINE CAN BE REPLACED WITH A SMALLER 50kW GENERATOR or 60kW GENERATOR!

• Built in 1991
• Three part galvanised steel tower – 30m
• Full Service history available
• De-Commissioned only in Ww42-2015 due to repowering

 

• Basic Refurbishment Available – ask for quotation-

• Full Refurbishment Available – (Includes brand new ball bearings for generator & gearbox)

• New foundation ring available for €2,800 EUR only

• Transportation start from only €2,500 EUR Installation prices start from €5,000 EUR plus travel & accommodation

PLEASE ASK FOR AVAILABLE REFURBISHING SCHEDULES & PRICE LIST:

 TECHNICAL DATA OF THE LAGERWEY 18/80 WIND TURBINE

GENERAL

• design according to NEN 6096
• certified by CIWI (ECN) – Holland
• cut in windspeed 3 m/sec.
• nom. windspeed 12 m/sec.
• cut out operating windspeed 25 m/sec.
• max. survive windspeed 60 m/sec.
• nominal power 80 kW
• specific power 315 W/m2
• calculated lifetime min. 20 years

ROTOR

• number of blades 2
• rotor position upwind
• angle of the main shaft 7⁰ with horizon
• diameter 18 m
• swept area 254 m2
• speed variable 60 -120 rotations per minute
• power regulation passive: blade-angle adjustment
• active : fully variable mutator system
• min. blade-angle 6,3⁰
• cone-angle 180 -164⁰
• direction clockwise
• location main bearing attached to gearbox

BLADES

• blade length 7,8 m
• chord 500 – 625 mm
• twist 5⁰
• material carbon fibre reinforced epoxy
• mounted flexible
• manufacturer A.T.V., Marseilles, France

GEARBOX

• number of stages 2
• ratio 1:20
• nominaal torque 8050 Nm
• manufacturer Flender, Germany

GENERATOR

• type asynchrony
• nominal power 80 kW or de-rated to 60kW for Italy (with certification)
• number of poles 4
• nominal voltage 400 volt
• frequency variable: 40 – 80 Hz.
• protection IP 55
• manufacturer ABB or equal quality

GRID-CONNECTION

• converter diodebridge – mutator
• converter principle AC – DC – AC
• powersupply 400 V / 3 fase / 50 Hz.

TOWER

• type cylindrical pipe
• number of sections 3
• hub height 31m
• material hot dip galvanised steel
• location ascent external

YAW-SYSTEM

• system active
• signal based on windvane
• driven by e-motor with worm-wheel reduction
• power yaw-motor 0,55 kW
• yaw speed 1,2⁰/sec.
• yaw bearing crown-bearing; externally geared
• yaw-break constant friction-break; 4 pcs.

CONTROLLER

• control by Microprocessor
• remote monitoring optional; typically via the public
• telecommunications network

SAFETY

• aerodynamic break by aerodynamic torque
• safety measures – passive blade-angle adjustment,

-      (emergency) yawing out of the wind at

• a windspeed above 25 m/sec.

MASSES

• Rotor 900 kg
• nacelle including rotor 3.000 kg
• tower excluding nacelle 10.000 kg

DOWNLOAD TECHNICAL DOCUMENTS:

LW18-80_Description.pdf

LW18-80_Operating_Instructions.pdf

Price upon request ‘where is – as is’ ExWorks owner’s site.

Contact us today

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

Current Sales List – click here!

Call us today on +44 (0) 117 244 9353

Share