NordTank NTK 65 Wind Turbines For Sale – MADE IN DENMARK – (65kW or 50kW de-rated for Italy – 50Hz)) – IMMEDIATELY AVAILABLE
Only €18,750 p.u. - part refurbished – ‘ExWorks’ owner’s site
Discounts available from 10 units upwards
ITALY BUYERS! These turbines have been fitted with a ‘change over kit’ in the gearbox to de-rate nominal output to max. 50kW!
-
Turbines are already dismantled
-
Refurbishing currently undertaken
-
-
Transportation start from only €3,500 EUR to any Seaport Europe EU
-
One complete turbine fits in only one 40ft container
-
-
Installation prices start from only €5,000 EUR plus travel and accommodation for crew
TECHNICAL DATA OF THE NORDTANK 65 WINDTURBINE
GENERAL
- Nominal power 65kW or 50kW de-rated
- Tower height 24.4m – 3 section tower
- Rotor diameter 16.5m
Generator
- Rated generator power: 49.5 kW at 1500 rpm
- 65 kW at 1800 rpm
- Type: Asynchronous 480 VAC; 3-phase;
Grid power, 50/60 Hz + or – 1 Hz,
Tower
- Hub height: 80 ft/24.4 m
- Material: Hot dip-galvanized tubular steel. Three sections, w/ access doors bottom & top.
Safety: Nacelle reached by inside tower ladder; lockable doors.
Rotor
- 3 fixed pitch blades
- 54 ft./16.5 m diameter
Upwind orientation
Blades
- Fiberglass reinforced polyester
2,290 sq ft/ 213 sqm, swept area
Operational Data
- Cut-in wind speed: 8 mph/3.6 m/s
- Cut-off wind speed: 55 mph or 25/m/s
Survival wind speed: 120 mph/53.6 m/s
Miscellaneous
- Up-Graded control panel mounted safely inside tower base.
- Centrifugally activated blade-tip brakes.
SYSTEM PERFORMANCE
-
Turbines were in Good operating condition at time of dis-mantling.
-
All gearboxes were drained for shipment.
-
Each turbine is inspected prior to container loading
-
Components are secured for transportation on sea
- All prices quoted are FOB: California U.S.A.
- WARRANTY: Turbines were completely inspected for flaws prior to shipment.
- New Blade and Tower Nuts and Bolts are included
- Replacement parts are available.
Safety
All turbines purchased include the following OSHA approved safety equipment which is packed within the turbine in container load at time of shipment.
- Safety harness with shock absorber.
- Climbing lanyards
- Slip grips, no fall
- Safety instructions manual
Price includes: Complete turbines, nacelles, rotors, blades, towers, controllers, new sets of nuts & bolts for blades and tower, Owner’s Manual, Service Manual, Foundation blueprints & one set of OSHA approved safety equipment per turbine!
-
All this for only €18,750 p.u. - part refurbished – ‘ExWorks’ owner’s site
-
Discounts available from 10 units upwards
NORDTANK NTK 65 WIND TURBINES (65kW or de-rated to 50kW – 50Hz) IMMEDIATELY AVAILABLE
Contact Ad owner for quick sale
Viewings will only be arranged if signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will not be accomodated!
Disclaimers:
Above technical data is subject to technical alterations, errors and omissions
1. Wind turbine installation is highly customized according to location, set-up, seismic conditions, soil, zoning, local restrictions, and many other factors
2. Taxes, Containerizing and Shipping is not included. Estimates do not include export and other international fees.
3. This information should be used for general budgetary reasons only.
4. Pricing and availability is subject to change at any time without notice
5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment
6. Please refer to our full terms & conditions. Click here!